House brand for all TelescopeAdapters.com products including the flagship VariMag Microscope Adapter System!
House brand for all TelescopeAdapters.com products including the flagship VariMag Microscope Adapter System!
Digital T Rings fit a wide variety of eyepieces and offer many advantages. Primarily used for attaching point & shoot type digital cameras to telescope eyepieces. They offer easy installation, light weight, virtually automatic centering, and the ability to couple more closely than just about any other adapter design.
Digital T Rings fit a wide variety of eyepieces and offer many advantages. Primarily used for attaching point & shoot type digital cameras to telescope eyepieces. They offer easy installation, light weight, virtually automatic centering, and the ability to couple more closely than just about any other adapter design.
T-Ring for Fuji GFX Mount - This “T-Ring” will couple your Mirrorless Camera to any T-Threaded Mount. The thread on this ring is Female 42mm (.75). This is a Special Dual Length T-Ring. It can be configured for Standard "T2" Length (~28mm) or Short Length (~11mm) by removing a spacer.
This 3 Piece Set fits all Fuji “X” Mount mirrorless cameras. You must have a telescope that accepts 2” Eyepieces/Accessories to use it. Includes: A Fuji “X” Mount T-Ring, a 2” T-Threaded Low Profile Barrel and a Glass Dust Filter to protect your camera sensor.
Fits: Fuji X Mount - X-Pro1, X-E1, etc. This Astrophotography kit is suitable for: Prime Focus & Eyepiece Projection
T-Ring for Fuji X Mount (X-PRO1, X-E1, etc) "T2" Length ~38mm - This “T-Ring” will couple your Mirrorless Camera to any T-Threaded Mount. The thread on this ring is Female 42mm (.75). Note that T-Rings for Mirrorless models are actually tubes, rather than rings.
Fits: Fuji X Mount - X-Pro1, X-E1, etc This Prime Focus Kit is suitable for: Prime Focus – In this imaging method the camera is connected directly to the telescope and placed at the "prime" focus of the telescope.
This 2" UltraWide Adapter fits all Fuji G Mount (GFX) cameras. You must have a telescope that accepts 2” accessories to use it. Please see the Setup Diagram below for your Telescope type. In some cases Optical or Physical extensions may be required to reach Focus. This is a Low Profile Adapter ~12mm thick.
Fits all Fuji GFX (G Mount) Mirrorless Models. Our Premium Astrophotography Kits are suitable for both Prime Focus and Eyepiece Projection Imaging. Fits 1.25" Eyepiece Ports. Includes our Premium VEPA+ Adapter.
3 pc SCT Set fits Fuji X-Mount Mirrorless Cameras. This 3 pc Set Includes our 2" UltraWide Prime Focus Adapter, 2" Glass Dust Filter and a 2" SCT Rear Port Adapter.
Fits All Fuji X Mount Mirrorless Cameras. Will NOT fit "GFX" Models. This is a Low Profile adapter. For Reflector owners this means you can likely reach true prime focus for the first time. For everyone else you gain over an inch of extra back-focus for filter wheels and such.
Fits All Fuji X Mount mirrorless cameras. Includes: Our Largest 2" VariMax Eyepiece Projection adapter, Our 2" UltraWide Prime Focus adapter, T-Ring, T-1.25" Adapter, a 1.25" Clear Dust Filter, 2" Clear Dust Filter, 1.25" Parfocalizing Ring, 2" Parfocalizing Ring, wrench set and custom fit Storage Case.
Fits All Fuji X (X Mount) Mirrorless Models and includes all the parts needed for both Prime Focus and Eyepiece Projection Imaging with a Reflector type telescope. Fits 1.25" Eyepiece Ports. Suitable for most Reflector, Newtonian, Dobsonians from Meade, Celestron, Orion, etc.
Fits All Fuji (X Mount) Mirrorless Models and includes all the parts needed for both Prime Focus and Eyepiece Projection Imaging with a Refractor type telescope. Fits 1.25" Eyepiece Ports. Suitable for most Refractors from Meade, Celestron, Orion, etc.
Fits all Fuji X Mount Mirrorless Cameras. Our Advanced Astrophotography Kits are suitable for both Prime Focus and Eyepiece Projection Imaging. Fits 1.25" Eyepiece Ports. Includes our VEPA+ Adapter.
This handy hybrid adapter lets you use common modern standard 1.25" format eyepieces in your telescope that normally accepts only .96" format eyepieces. Compression Ring fitting to avoid marring your eyepiece barrels.