House brand for all TelescopeAdapters.com products including the flagship VariMag Microscope Adapter System!
House brand for all TelescopeAdapters.com products including the flagship VariMag Microscope Adapter System!
Fits All Sony (A Mount) DSLR Models and includes all the parts needed for both Prime Focus and Eyepiece Projection Imaging with a Reflector type telescope. Fits 1.25" Eyepiece Ports. Suitable for most Reflector, Newtonian, Dobsonians from Meade, Celestron, Orion, etc.
Fits All Sony (A Mount) DSLR Models and includes all the parts needed for both Prime Focus and Eyepiece Projection Imaging with a Refractor type telescope. Fits 1.25" Eyepiece Ports. Suitable for most Refractors from Meade, Celestron, Orion, etc.
Fits Sony E-Mount Mirrorless Cameras: NEX, a6xxx, A1/A7/A9, QX, VG, FX30, ZV-E10, etc. This adapter is both 2" UltraWide and Low Profile. It will produce a non-vignetted image, even with Full Frame sensors and give you an extra inch of back-focus too! Perfect for Reflector owners who could not previously reach focus.
Fits E-Mount - Including NEX, A7 & VG Series. Includes: 1.25" VariMax "Eyepiece Projection" adapter, 1.25" & 2" Lower Barrels for the VariMax, 2" UltraWide "Prime Focus" adapter, T-Ring, 1.25" Clear Dust Filter, 2" Clear Dust Filter, 1.25" Parfocalizing Ring, 2" Parfocalizing Ring, wrench set & custom Storage Case.
Fits Sony E-Mount - Including NEX, A7 & VG Series. This Astrophotography kit is suitable for: Prime Focus & Eyepiece Projection
This Fixed Magnification Camera adapter set works with all Sony E Mount (NEX/A7/QX/VG) Cameras and will fit most popular Ocular ports. The 2X magnification can even handle Full Frame sensors without Vignetting. Directly fits 23mm Ocular and Trinocular Ports.
Fits E-Mount - Including NEX, A7 & VG Series. This Prime Focus Kit is suitable for: Prime Focus – In this imaging method the camera is connected directly to the telescope and placed at the "prime" focus of the telescope.
3 pc SCT Set fits Sony E-Mount Mirrorless Cameras: NEX, a6xxx, A1/A7/A9, QX, VG, FX30, ZV-E10, etc. This 3 pc Set Includes our Finest 2" UltraWide Prime Focus Adapter, 2" Glass Dust Filter and a 2" SCT Rear Port Adapter.
Fits All Sony E Mount (E Mount) Mirrorless Models and includes all the parts needed for both Prime Focus and Eyepiece Projection Imaging with a Reflector type telescope. Fits 1.25" Eyepiece Ports. Suitable for most Reflector, Newtonian, Dobsonians from Meade, Celestron, Orion, etc.
Fits All Sony E (E Mount) Mirrorless Models and includes all the parts needed for both Prime Focus and Eyepiece Projection Imaging with a Refractor type telescope. Fits 1.25" Eyepiece Ports. Suitable for most Refractors from Meade, Celestron, Orion, etc.
Fits Sony A-Mount - Full Size DSLR. This Prime Focus Kit is suitable for: Prime Focus – In this imaging method the camera is connected directly to the telescope and placed at the "prime" focus of the telescope.
Fits Sony E-Mount Mirrorless Cameras including NEX, a6xxx, A1/A7/A9, QX, VG, FX30, ZV-E10. Our Advanced Astrophotography Kits are suitable for both Prime Focus and Eyepiece Projection Imaging. Fits 1.25" Eyepiece Ports. Includes our Premium VEPA+ Adapter.
Our custom made "T-Minus" rings get their name from the fact that they are shorter than the "T2" standard but still have the same 42mm (.75 pitch) threads. Normal T-Rings for MIL type cameras are typically 30-38mm deep. Our "T-Minus" rings are only 10mm deep. Fits ALL Sony "E" Mount "Mirrorless" Cameras.
Fits Canon EOS-M Mirrorless Cameras, Standard "T2" Length ~37mm. This “T-Ring” will couple your Mirrorless Camera to any T-Threaded Mount. The thread on this ring is Female 42mm (.75). Note that T-Rings for Mirrorless models are actually tubes, rather than rings. Will NOT Fit EOS-R (See #TEOSR).
Fits Canon EOS-R Mirrorless Cameras, Standard "T2" Length ~37mm. This “T-Ring” will couple your Mirrorless Camera to any T-Threaded Mount. The thread on this ring is standard Female 42mm (.75). Will NOT Fit EOS-M (See #TEOSM).
Fits ALL Canon EOS & Rebel SLR & DSLR models. Fits Canon EF/EF-S Mount. NOT for Mirrorless models. A "T-Ring" couples your camera body to a T-Adapter or other "T" threaded camera mount. This is a standard T2 version with 42mm Thread.