House brand for all TelescopeAdapters.com products including the flagship VariMag Microscope Adapter System!
House brand for all TelescopeAdapters.com products including the flagship VariMag Microscope Adapter System!
T-Ring for Fuji X Mount (X-PRO1, X-E1, etc) "T2" Length ~38mm - This “T-Ring” will couple your Mirrorless Camera to any T-Threaded Mount. The thread on this ring is Female 42mm (.75). Note that T-Rings for Mirrorless models are actually tubes, rather than rings.
Fits: Fuji X Mount - X-Pro1, X-E1, etc This Prime Focus Kit is suitable for: Prime Focus – In this imaging method the camera is connected directly to the telescope and placed at the "prime" focus of the telescope.
This 2" UltraWide Adapter fits all Fuji G Mount (GFX) cameras. You must have a telescope that accepts 2” accessories to use it. Please see the Setup Diagram below for your Telescope type. In some cases Optical or Physical extensions may be required to reach Focus. This is a Low Profile Adapter ~12mm thick.
Fits all Fuji GFX (G Mount) Mirrorless Models. Our Premium Astrophotography Kits are suitable for both Prime Focus and Eyepiece Projection Imaging. Fits 1.25" Eyepiece Ports. Includes our Premium VEPA+ Adapter.
3 pc SCT Set fits Fuji X-Mount Mirrorless Cameras. This 3 pc Set Includes our 2" UltraWide Prime Focus Adapter, 2" Glass Dust Filter and a 2" SCT Rear Port Adapter.
Fits All Fuji X Mount Mirrorless Cameras. Will NOT fit "GFX" Models. This is a Low Profile adapter. For Reflector owners this means you can likely reach true prime focus for the first time. For everyone else you gain over an inch of extra back-focus for filter wheels and such.
Fits All Fuji X (X Mount) Mirrorless Models and includes all the parts needed for both Prime Focus and Eyepiece Projection Imaging with a Reflector type telescope. Fits 1.25" Eyepiece Ports. Suitable for most Reflector, Newtonian, Dobsonians from Meade, Celestron, Orion, etc.
Fits All Fuji (X Mount) Mirrorless Models and includes all the parts needed for both Prime Focus and Eyepiece Projection Imaging with a Refractor type telescope. Fits 1.25" Eyepiece Ports. Suitable for most Refractors from Meade, Celestron, Orion, etc.
Fits all Fuji X Mount Mirrorless Cameras. Our Advanced Astrophotography Kits are suitable for both Prime Focus and Eyepiece Projection Imaging. Fits 1.25" Eyepiece Ports. Includes our VEPA+ Adapter.
This handy hybrid adapter lets you use common modern standard 1.25" format eyepieces in your telescope that normally accepts only .96" format eyepieces. Compression Ring fitting to avoid marring your eyepiece barrels.
This handy hybrid adapter lets you use your older .96" format eyepieces in your modern telescope that normally accepts only 1.25" format eyepieces.
This handy hybrid adapter lets you use standard 2" format eyepieces and accessories in your telescope that normally accepts only 1.25" format eyepieces.
This handy hybrid adapter lets you use your 1.25" format eyepieces in your telescope that normally accepts only 2" format eyepieces.
This handy hybrid adapter lets you use your 1.25" format eyepieces in your telescope that normally accepts only 2" format eyepieces.
This hybrid adapter lets you use your 1.25" format eyepieces in the VariMax II adapter that normally accepts only 2" format eyepieces.
This 2" UltraWide Adapter fits all Leica L Mount Mirrorless cameras. You must have a telescope that accepts 2” accessories to use it. Please see the Setup Diagram below for your Telescope type. In some cases Optical or Physical extensions may be required to reach Focus. This is a Low Profile Adapter.