House brand for all TelescopeAdapters.com products including the flagship VariMag Microscope Adapter System!
House brand for all TelescopeAdapters.com products including the flagship VariMag Microscope Adapter System!
Fits: Samsung NX Mount - NX20, NX210, NX1000, etc. This Prime Focus Kit is suitable for: Prime Focus – In this imaging method the camera is connected directly to the telescope and placed at the "prime" focus of the telescope.
Fits Samsung NX Mount - NX20, NX210, NX1000, etc. Our Premium Astrophotography Kits are suitable for both Prime Focus and Eyepiece Projection Imaging. Fits 1.25" Eyepiece Ports. Includes our Premium VEPA+ Adapter.
Includes: 1.25" VariMax "Eyepiece Projection" adapter, 1.25" & 2" Lower Barrels for the VariMax, 2" UltraWide "Prime Focus" adapter, T-Ring, 1.25" Clear Dust Filter, 2" Clear Dust Filter, 1.25" Parfocalizing Ring, 2" Parfocalizing Ring, wrench set & custom Storage Case.
3 pc SCT Set fits all Sony (A Mount) DSLR Cameras. This 3 pc Set Includes our 2" UltraWide Prime Focus Adapter, 2" Glass Dust Filter and a 2" SCT Rear Port Adapter. For Prime Focus (Deep Sky) Imaging.
Fits all Sony A-Mount Full Size DSLR Cameras. (Not for E Mount Mirrorless Models. See #DNEX). Our Advanced Astrophotography Kits are suitable for both Prime Focus and Eyepiece Projection Imaging. Fits 1.25" Eyepiece Ports. Includes our VEPA+ Adapter.
Fits (Full Size) Sony Alpha Cameras. Our True-2™ UltraWide Adapter is a true 2" prime focus adapter that takes you directly from the bayonet mount to a 2" barrel with as few wasted photons as possible, adding as much as 10mm additional clear aperture over legacy adapters!
Fits Sony A-Mount - Full Size DSLR. This Astrophotography kit is suitable for: Prime Focus & Eyepiece Projection. PLEASE NOTE: Does not fit "Mirrorless" Models (NEX, A7. etc). See Part# BNEX for "E" Mount Cameras.
This Fixed Magnification Camera adapter set works with all Sony Alpha "A-Mount" DSLR Cameras and will fit most popular Ocular ports. The 2X magnification can even handle Full Frame sensors without Vignetting. Directly fits 23mm Ocular and Trinocular Ports.
Fits A-Mount - Full Size DSLR. Includes: 1.25" VariMax "Eyepiece Projection" adapter, 1.25" & 2" Lower Barrels for the VariMax, 2" UltraWide "Prime Focus" adapter, T-Ring, 1.25" Clear Dust Filter, 2" Clear Dust Filter, 1.25" Parfocalizing Ring, 2" Parfocalizing Ring, wrench set & custom Storage Case.
Fits All Sony (A Mount) DSLR Models and includes all the parts needed for both Prime Focus and Eyepiece Projection Imaging with a Reflector type telescope. Fits 1.25" Eyepiece Ports. Suitable for most Reflector, Newtonian, Dobsonians from Meade, Celestron, Orion, etc.
Fits All Sony (A Mount) DSLR Models and includes all the parts needed for both Prime Focus and Eyepiece Projection Imaging with a Refractor type telescope. Fits 1.25" Eyepiece Ports. Suitable for most Refractors from Meade, Celestron, Orion, etc.
Fits Sony E-Mount Mirrorless Cameras: NEX, a6xxx, A1/A7/A9, QX, VG, FX30, ZV-E10, etc. This adapter is both 2" UltraWide and Low Profile. It will produce a non-vignetted image, even with Full Frame sensors and give you an extra inch of back-focus too! Perfect for Reflector owners who could not previously reach focus.
Fits E-Mount - Including NEX, A7 & VG Series. Includes: 1.25" VariMax "Eyepiece Projection" adapter, 1.25" & 2" Lower Barrels for the VariMax, 2" UltraWide "Prime Focus" adapter, T-Ring, 1.25" Clear Dust Filter, 2" Clear Dust Filter, 1.25" Parfocalizing Ring, 2" Parfocalizing Ring, wrench set & custom Storage Case.
Fits Sony E-Mount - Including NEX, A7 & VG Series. This Astrophotography kit is suitable for: Prime Focus & Eyepiece Projection
This Fixed Magnification Camera adapter set works with all Sony E Mount (NEX/A7/QX/VG) Cameras and will fit most popular Ocular ports. The 2X magnification can even handle Full Frame sensors without Vignetting. Directly fits 23mm Ocular and Trinocular Ports.
Fits E-Mount - Including NEX, A7 & VG Series. This Prime Focus Kit is suitable for: Prime Focus – In this imaging method the camera is connected directly to the telescope and placed at the "prime" focus of the telescope.