Hybrid Adapter .96"-1.25"
Use 1.25" accessories in your .96" Telescope!

This handy hybrid adapter lets you use common modern standard 1.25" format eyepieces in your telescope that normally accepts only .96" format eyepieces. Compression Ring fitting to avoid marring your eyepiece barrels. Requires a bit of extra back focus since the eyepiece will be set back a bit. CNC Machined of aluminum with a durable black anodized finish. Threaded to accept .96" eyepiece filters.

Hybrid Adapter 1.25"- .96"
Use .96" accessories in your 1.25" Telescope!

This handy hybrid adapter lets you use your older .96" format eyepieces in your modern telescope that normally accepts only 1.25" format eyepieces. Compression Ring fitting to avoid marring your eyepiece barrels. CNC Machined of aluminum with a durable black anodized finish. Threaded to accept 1.25" eyepiece filters.

Hybrid Adapter 1.25"- 2"
Use 2" accessories in your 1.25" Telescope!

This handy hybrid adapter lets you use standard 2" format eyepieces and accessories in your telescope that normally accepts only 1.25" format eyepieces. Compression Ring fitting to avoid marring your eyepiece barrels. Requires some extra back focus since the eyepiece will be set back a bit. CNC Machined of aluminum with a durable black anodized finish. Threaded to accept 1.25" eyepiece filters.

Low Profile 2" - 1.25" Adapter


NOTE: This is a low profile adapter. It ONLY works with diagonals,
extensions and focusers with a notch for thumbscrew clearance as pictured above.

This handy hybrid adapter lets you use your 1.25" format eyepieces in your telescope that normally accepts only 2" format eyepieces. Compression Ring fitting to avoid marring your eyepiece barrels. CNC Machined of aluminum with a durable black anodized finish. To make the adapter as low profile as possible it REQUIRES a notched diagonal, extension or focuser tube to allow clearance for the thumbscrew. Threaded to accept 48mm eyepiece filters.

---

1.25" Eyepiece Extension with 1" (26mm) Setback

These extensions thread into the bottom of a 1.25" eyepiece barrel and extend it 26mm. Great when using Parfocalizing rings as the eyepiece barrel is sometimes too short to place the ring where it is needed, and normal slip fit extensions won't work. CNC machined with a durable black anodized finish. Stackable and threaded to accept 1.25" eyepiece filters.

NOTE: We do not recommend supporting the weight of a camera setup through this type of extension.

Description	Item #	Price	Add to Cart
1.25" Eyepiece Barrel Extension (w/26mm Setback)	EPX1	$19.95

---

2" Extension with 3" (80mm) Setback

Many refractor type scopes run into a problem when using a camera. They don't have enough "in focus" to use a camera with the diagonal in place and they don't have enough "out focus" with the diagonal removed. The solution is to replace the diagonal with an extension having a bit less optical length. Compression Ring fitting to avoid marring your eyepiece barrels. Accepts standard 2" eyepieces and accessories. CNC machined with a durable black anodized finish. Threaded to accept 48mm eyepiece filters.

Description	Item #	Price	Add to Cart
2" Extension (w/80mm Setback)	EXT280	$29.95	Sorry Out of Stock

---

"T" Extension Set - 4 pc

This handy extension set can be used to securely place your camera where you want it. Threaded Male on one end, Female on the other. Thread size is 42mm (.75 pitch) for use with any standard T-Ring or T Adapter. Includes 4 pieces (20mm, 15mm, 10mm and 5mm). CNC machined of aluminum, fully baffled and anodized black.

Description	Item #	Price	Add to Cart
"T" Extension Set (4 piece)	TEXT	$29.95

---

All material on this website is copyright CNC Parts Supply, Inc. 2011. All rights Reserved.