Sony E-Mount (NEX/A7/QX/VG) 2" UltraWide True-2 Prime Focus Adapter

SFFE

New product

Fits: Sony NEX E-Mount Mirrorless Only. Our True-2™ UltraWide Adapter is a true 2" prime focus adapter that takes you directly from the bayonet mount to a 2" barrel with as few wasted photons as possible, adding as much as 10mm additional clear aperture over legacy adapters!

More details

$89.00

Add to wishlist

More info

2" UltraWide True-2 Prime Focus Adapter Set for Sony E Mount (NEX/A7/QX/VG Series)

mjpt.gif

sonylogo.jpg

---

As seen in Sky & Telescope Magazine.

CEM2F-400w.jpg

This is a non-vignettng Full Aperture adapter!

CEM2F-BACK-w200.jpg

Bayonet Mounts directly to your Camera Body.

CEM2F-FRONT-w200.jpg

The 2" Barrel inserts directly into 2" Eyepiece Ports
The included (removable) Dust Filter keeps dust out of your Camera!


This adapter is Standard “T2” Length and will have an installed height of approximately 38mm.

If you need a Low-Profile adapter see our #T2NEX-FF

Q: I have a Meade (or Celestron) SCT telescope and would like to have the benefits of this adapter but my scope only accepts 1.25" eyepieces. Is there any way I can use this adapter?
A:
If your SCT is not already setup to accept 2" eyepieces and accessories you will need a 2" Rear Port Adapter, this item threads onto the large thread on the rear cell of your scope and converts it to a standard 2" eyepiece port. The T-Minus adapter will slide directly into this port.

Q: I have a Meade (or Celestron) SCT telescope. Will this adapter thread directly on to the rear cell of my scope?
A:
This adapter will not thread directly onto the rear of an SCT scope, It has a 2" barrel just like a 2" eyepiece and inserts into a 2" eyepiece port. If your SCT is not setup to accept 2" eyepieces you will need a 2" Rear Port Adapter. This is actually better than if it threaded on to the scope directly as it allows you to very quickly and easily install and remove the camera during a session. It also gives you absolute freedom in positioning the camera radially for the best framing of your shot.

Q: Will this adapter work on my Refractor type telescope with 2" Focuser?
A:
Yes, but most refractor type telescopes require you to remove the diagonal and replace it with a slightly shorter extension tube to reach focus with a camera. Please see your telescope manual or our "Camera Adapter FAQ" page under the heading "Focusing Issues>Refractors" for further details.

Q: Will this adapter work on my Reflector/Newtonian/Dob type telescope with 2" Focuser?
A:
Yes, but many reflector type telescopes require you to install a Barlow Lens between the camera adapter and the focuser to reach focus with a camera. Please see your telescope manual or our "Camera Adapter FAQ" page under the heading "Focusing Issues> Reflectors" for further details.

Q: Will this adapter fit my spotting scope (or microscope)?
A:
This adapter is for astronomical type telescopes equipped with 2" eyepiece ports ONLY. It will not fit spotting scopes or microscopes. If you need help selecting the proper adapter just send us an email. Please include camera and scope models.



sonylogo.jpg
For ALL SONY E-Mount (Mirrorless) Cameras
Fits all SONY (E-Mount) cameras Including (Full Frame Models) A7, A7S, A7R, A7R II, A7S II, etc, and (APS-C Models) NEX 3, NEX 3n, NEX5, NEX 5n, NEX 5nk, NEX 5R, NEX 6, NEX 7, NEX 7k, NEX C3, NEX C3k, NEX F3, a5000, a5100, a3000, a6000, a7000, etc.
As well as Sony Handycam Video Cameras VG10, VG20, VG30, VG900, etc.

Customers who bought this product also bought: